教育经历 1991.81994.7 河南省偃师高中无 2001.32004.2 哈尔滨工业大学材料加工工程博士 1998.92001.3 洛阳工学院材料加工工程硕士 1994.91998.7 洛阳工学院模具设计及制造学士 工作经历 2004.4至今 大连理工大学教师

材料加工过程组织性能控制 高性能构件近净成形 新材料制备及超塑性 塑性加工技术

Zu, Yufei,Wang, Kang,Lv, Shasha,Chen, Guoqing,Fu, Xuesong,Zhou, Wenlong.Interfacial microstructure and mechanical properties of the superplastically joined TiO2-doped ...[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,779 Wang, Qi,Chen, Guo-qing,Wang, Kang,Fu, Xue-song,Zhou, Wen-long.Enhanced TiAl/Ti3SiC2 diffusion bonding by introducing amorphous intergranular films in Ti3SiC2...[J],SCRIPTA MATERIALIA,2020,178:493-497 李明浩,王雅琨,陈国清,付连生,付雪松,周文龙.高温熔凝法制备Y2O3/Sm2O3双掺杂Al2O3-ZrO2共晶陶瓷的微观组织及力学性能[J],陶瓷学报,2019,40(3):334-341 Zhang, S. H.,Chen, D. Y.,Shang, Y. L.,Chen, G. Q.,Pokrovsky, A., I,Ma, Y.,Xu, Y.,El-Aty, A. A..Experimental Investigation of Novel Impact Hydroforming Technology on Sheet Metal Formability[A],2018,1063(1) Luo, Junting,Luo, Shuyi,Zhang, Chunxiang,Xue, Yahong,Chen, Guoqing.Analysis of the intragranular microstructure in ceramic nanocomposites and their effect on the ...[J],JOURNAL OF THE AMERICAN CERAMIC SOCIETY,2018,101(11):5151-5156 Fu, Xuesong,Wang, Xiaochen,Wang, Qi,Zhou, Wenlong,Xu, Huiyuan,Liu, Degui,Li, Zhiqiang,Chen, Guoqing.Effect of Surface Self-Nanocrystallization on Diffusion Bonding Between a Titanium Alloy and a ...[J],JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2018,27(10,SI):5551-5560 刘桂良,武天洋,李明浩,潘钱付,唐睿,陈国清,王清.固溶和稳定化处理后Zr-Mo微合金化310S不锈钢的显微组织和耐腐蚀性能[J],机械工程材料,2018,42(9):26-32,40 郑晓兵,牛志强,周文龙,陈国清,刘德贵,李志强,付雪松.基于新型试验装置的TC4钛合金面接触微动磨损行为研究[J],工程与试验,2018,58(3):95-99 刘崇远,陈国清,邵杰,李志强,周文龙,付雪松.X射线衍射法测试TC4钛合金喷丸残余应力的精确度研究[J],工程与试验,2018,58(3):8-12,60 Yang, Qi,Zhou, Wenlong,Niu, Zhiqiang,Zheng, Xiaobing,Chen, Guoqing,Li, Zhiqiang,Fu, Xuesong,Wang, Qi.Effect of different surface asperities and surface hardness induced by shot-peening on the fret...[J],SURFACE & COATINGS TECHNOLOGY,2018,349:1098-1106 Sun, Weitao,Zhou, Wenlong,Liu, Jianfa,Fu, Xuesong,Chen, Guoqing,Yao, Shan.Studies on Dynamic Tribology Properties of Friction Materials by Using an Approximate In Situ O...[J],JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME,2018,140(5) 陈国清,赵薇,任媛媛,付雪松,周文龙.微波烧结WC-ZrO2复合材料的微观组织及增韧机理[J],现代技术陶瓷,2018,39(4):287-294 Li, Zhen,Wen, Dong-hui,Ma, Yue,Wang, Qing,Chen, Guo-qing,Zhang, Rui-qian,Tang, Rui,He, Huan.Prediction of alloy composition and microhardness by random forest in maraging stainless steels...[J],JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2018,25(7):717-723 Wen, D. H.,Liaw, P. K.,Wang, Q.,Jiang, B. B.,Zhang, C.,Li, X. N.,Chen, G. Q.,Tang, R.,Zhang, R. Q.,Dong, C..Developing fuel cladding Fe-25Cr-22Ni stainless steels with high microstructural stabilities vi...[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2018,719:27-42 Sun, Weitao,Zhou, Wenlong,Liu, Jianfa,Fu, Xuesong,Chen, Guoqing,Yao, Shan.Development of a Composite Friction Material with Excellent Fade Resistance by Employing Oversi...[J],TRIBOLOGY LETTERS,2018,66(1) Sun, Weitao,Zhou, Wenlong,Liu, Jianfa,Fu, Xuesong,Chen, Guoqing,Yao, Shan.The Size Effect of SiO2 Particles on Friction Mechanisms of a Composite Friction Material[J],TRIBOLOGY LETTERS,2018,66(1) Lv, Xingjun,Chen, Guoqing,Duan, Yuping.Electromagnetic wave absorption properties of cement-based composites filled with graphene nano...[J],CONSTRUCTION AND BUILDING MATERIALS,2018,162:280-285 Yang, Qi,Zhou, Wenlong,Zhong, Yining,Zhang, Xinhua,Fu, Xuesong,Chen, Guoqing,Li, Zhiqiang.Effect of shot-peening on the fretting wear and crack initiation behavior of Ti-6Al-4V dovetail...[J],INTERNATIONAL JOURNAL OF FATIGUE,2018,107:83-95 Ma, Yan,Chen, Guo-qing,Xu, Yong,Zhang, Shi-Hong,Banabic, Dorel,Abd El-Aty, Ali,Chen, Da-yong,Cheng, Ming,Song, Hong-wu,Pokrovsky, Artur Igorevich.Investigation on formability enhancement of 5A06 aluminium sheet by impact hydroforming[J],CIRP ANNALS-MANUFACTURING TECHNOLOGY,2018,67(1):281-284 杨喜锐,周大雨,马晓倩,王雪霞,徐进,陈国清,侯晓多,刘晓英,高晓霞.Synthesis of dopant-free tetragonal zirconia nano-powders with aqueous precursor and their optica...[J],Materials Research Expresss,2018,6:15041-15041 房灿峰,郭文凯,王荫洋,陈国清,郝海.原位Mg2Sn增强镁基复合材料的制备及其组织性能研究[A],2018 陈国清,武天洋,潘钱付,唐睿,王清,周文龙.新型微合金化310S奥氏体不锈钢热轧板的微观组织演变[A],2017,4 Wen, Donghui,Jiang, Beibei,Wang, Qing,Yu, Fengyun,Li, Xiaona,Tang, Rui,Zhang, Ruiqian,Chen, Guoqing,Dong, Chuang.Influences of Mo/Zr minor-alloying on the phase precipitation behavior in modified 310S austeni...[J],MATERIALS & DESIGN,2017,128:34-46 Fu, Lian-sheng,Wang, Zhen,Fu, Xue-song,Chen, Guo-qing,Zhou, Wen-long.Microstructure and mechanical properties of Y2O3-doped melt-grown Al2O3-ZrO2 eutectic ceramic[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,703:372-379 Yang, Shuo,Yang, Hongbiao,Wang, Dongjun,Dai, Zhaohua,Huang, Yi,Chen, Guoqing.Failure analysis of the turret bearings wear on SYS in the Bohai Bay area[J],ENGINEERING FAILURE ANALYSIS,2017,78:134-146 房灿峰,闻志恒,郝海,陈国清,张兴国.纳米Mg_2Sn增强镁基复合材料的组织与性能[J],稀有金属材料与工程,2017,46(06):1719-1722 付雪松,孙胃涛,韩文波,李康,陈国清,周文龙.基于高温熔凝法Al2O3/ZrO2/YAG共晶陶瓷显微组织演变规律[J],材料工程,2017,45(2):46-53 Fu, Liansheng,Fu, Xuesong,Chen, Guoqing,Han, Wen-bo,Zhou, Wenlong.Tailoring the morphology in Y2O3 doped melt-grown Al2O3/ZrO2 eutectic ceramic[J],SCRIPTA MATERIALIA,2017,129:20-24 Fu, Xuesong,Chen, Guoqing,Yang, Qi,Sun, Zhonggang,Zhou, Wenlong.The influence of hydrogen on chip formation in cutting Ti-6Al-4V alloys[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,89(1-4):371-375 Jiang, Beibei,Wang, Qing,Wen, Donghui,Xu, Fen,Chen, Guoqing,Dong, Chuang,Sun, Lixian,Liaw, Peter K..Effects of Nb and Zr on structural stabilities of Ti-Mo-Sn-based alloys with low modulus[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,687:1-7 Yang, Qi,Zhou, Wenlong,Gai, Pengtao,Zhang, Xinhua,Fu, Xuesong,Chen, Guoqing,Li, Zhiqiang.Investigation on the fretting fatigue behaviors of Ti-6A1-4V dovetail joint specimens treated w...[J],WEAR,2017,372:81-90 Fu, Xue-song,Fu, Lian-sheng,Chen, Guo-qing,Han, Wen-Bo,Zhou, Wen-long.High temperature deformation of non-directionally solidified Al2O3/YAG/ZrO2 eutectic bulk ceram...[J],CERAMICS INTERNATIONAL,2017,43(2):1781-1787 Fang, Canfeng,Zhang, Xingguo,Chen, Guoqing,Hao, Hai,Liu, Xiaoteng,Wen, Zhiheng.Microstructures and mechanical properties of Mg2Sn-nanophase reinforced Mg-Mg2Sn composite[J],MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2017,684:229-232 卢尚健,付雪松,孙胃涛,周文龙,陈国清.不同改性矾土添加量下树脂基复合摩擦材料的性能[J],机械工程材料,2017,41(1):85-89 周文龙,陈国清,付雪松.Investigation on the fretting fatigue behaviors of Ti-6Al-4V dovetail joint specimens treated wit...[J],wear,2017,372(2):81-90 付雪松,陈国清,周文龙.High temperature deformation of non-directionally solidified Al2O3/YAG/[J],Ceramics international,2017,43(2):1781-1787 付雪松,周文龙,陈国清.湿喷丸强化对TC4 合金疲劳断裂机制的影响[J],稀有金属材料与工程,2017,46(3):765-769 房灿峰,郝海,陈国清,张兴国.纳米Mg2Sn增强镁基复合材料组织与性能[J],稀有金属材料与工程,2017,46:1719-1722 Fu, X.S.,Yang, Q.,Sun, W.,Lu, S.J.,Chen, G.Q.,Zhou, W.L..Multi-pass large strain rolling of as-cast AZ31 magnesium alloy[J],MATERIALS SCIENCE AND TECHNOLOGY,2016,32(18):1869-1876 陈国清,王惠敏,李鸿翔,唐睿,周文龙.润滑条件对不锈钢管材推弯成形质量的影响[J],锻压技术,2016,41(11):115-121