3D print Metallic biomaterials and composites Nanocrystalline materials and metallic glasses Alloy development, materials processing, microstructure characterisation in light-weight alloys and steels Mechanical behaviour and deformation mechanism Nanomaterials for wastewater treatment

Liu, Y., Li, S., Hou, W., Wang, S., Hao, Y., Yang, R., Sercombe, T., Zhang, L., (2016), Electron beam melted beta-type Ti-24Nb-4Zr-8Sn porous structures with high strength-to-modulus ratio. Journal of Materials Science and Technology, 32(6), 505-508, DOI: 10.1016/j.jmst.2016.03.020. Ehtemam Haghighi, S., Liu, Y., Cao, G., Zhang, L., (2016), Influence of Nb on the ? ? ?? martensitic phase transformation and properties of the newly designed Ti?Fe?Nb alloys. Materials Science and Engineering C: Materials for Biological Applications, 60(2016), 503-510, Amsterdam, Netherlands, DOI: 10.1016/j.msec.2015.11.072. Dai, N., Zhang, L., Zhang, J., Chen, Q., Wu, M., (2016), Corrosion behaviour of selective laser melted Ti-6Al-4V Alloy in NaCl solution. Corrosion Science, 102(2016), 484-489, DOI: 10.1016/j.corsci.2015.10.041. Ehtemam Haghighi, S., Liu, Y., Cao, G., Zhang, L., (2016), Phase transition, microstructural evolution and mechanical properties of Ti-Nb-Fe alloys induced by Fe addition. Materials and Design, 97(2016), 279-286, London, UK, DOI: 10.1016/j.matdes.2016.02.094. Zhang, L., Attar, H., Calin, M., Eckert, J., (2016), Review on manufacture by selective laser melting and properties of titanium based materials for biomedical applications. Materials Technology, 31(2), 66-76, Oxfordshire, UK, DOI: 10.1179/1753555715Y.0000000076. La, L., Leong, Y., Leatherday, C., Au, P., Hayward, K., Zhang, L., (2016), X-ray protection, surface chemistry and rheology of ball-milled submicron Gd2O3 aqueous suspension. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 501(2016), 75-82, DOI: 10.1016/j.colsurfa.2016.04.058. Wang, L., Wang, C., Zhang, L., Chen, L., Lu, W., Zhang, D., (2016), Phase transformation and deformation behavior of NiTi-Nb eutectic joined NiTi wires. Scientific Reports, 6(2016), Article no. 23905, London, UK, DOI: 10.1038/srep23905. Liu, L., Yang, C., Kang, L., Qu, S., Li, X., Zhang, W., Chen, W., Li, Y., Li, P., Zhang, L., (2016), A new insight into high-strength Ti62Nb12.2Fe13.6Co6.4Al5.8 alloys with bimodal microstructure fabricated by semi-solid sintering. Scientific Reports, 6(2016), Article no. 23467, London, UK, DOI: 10.1038/srep23467. Ehtemam Haghighi, S., Prashanth, K., Attar, H., Chaubey, A., Cao, G., Zhang, L., (2016), Evaluation of mechanical and wear properties of Ti-xNb-7Fe alloys designed for biomedical applications. Materials and Design, 111(2016), 592-599, London, UK, DOI: 10.1016/j.matdes.2016.09.029. Dai, ND., Zhang, L., Zhang, J., Zhang, X., Ni, Q., Chen, Y., Wu, M., Yang, C., (2016), Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes. Corrosion Science, 111(2016), 703-710, DOI: 10.1016/j.corsci.2016.06.009. Jia, Z., Zhang, W., Wang, W., Habibi, D., Zhang, L., (2016), Amorphous Fe78Si9B13 alloy: An efficient and reusable photo-enhanced Fenton-like catalyst in degradation of cibacron brilliant red 3B-A dye under UV-vis light. Applied Catalysis B: Environmental, 192(2016), 46-56, DOI: 10.1016/j.apcatb.2016.03.048. Liu, Y., Li, S., Wang, H., Hou, W., Hao, Y., Yang, R., Sercombe, T., Zhang, L., (2016), Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting. Acta Materialia, 113(2016), 56-67, DOI: 10.1016/j.actamat.2016.04.029. Zhang, L., Attar, H., (2016), Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: a review. Advanced Engineering Materials, 18(4), 463-475, DOI: 10.1002/adem.201500419. Liu, L., Yang, C., Kang, L., Long, Y., Xiao, Z., Li, P., Zhang, L., (2016), Equiaxed Ti-based composites with high strength and large plasticity prepared by sintering and crystallizing amorphous powder. Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing, 650(2016), 171-182, DOI: 10.1016/j.msea.2015.10.048. Chen, L., Zeng, Q., Li, J., Lu, J., Zhang, Y., Zhang, L., Qin, X., Lu, W., Zhang, L., Wang, L., Zhang, D., (2016), Effect of microstructure on corrosion behavior of a Zr-Sn-Nb-Fe-Cu-O alloy. Materials and Design, 92(2016), 888-896, DOI: 10.1016/j.matdes.2015.12.067. Chen, L., Li, J., Zhang, Y., Lu, W., Zhang, L., Wang, L., Zhang, D., (2016), Effect of low temperature pre-deformation on precipitation behavior and microstructure during fabrication. Journal of Nuclear Science and Technology, 54(4), 496-507, DOI: 10.1080/00223131.2015.1059776. Liu, J., Wang, J., Gao, F., Ju, Y., Zhang, X., Zhang, L., (2016), Flow consistency between non-Darcy flow in fracture network and nonlinear diffusion in matrix to gas production rate in fractured shale gas reservoirs. Transport in Porous Media, 111(1), 97-121, Dordrecht, Netherlands, DOI: 10.1007/s11242-015-0583-9. Li, Y., Wang, Y., An, B., Xu, H., Liu, Y., Zhang, L., Ma, H., Wang, W., (2016), A practical anodic and cathodic curve intersection model to understand multiple corrosion potentials of fe-based glassy alloys in OH- contained solutions. PLoS One, 11(1), e0146421, San Francisco, USA, DOI: 10.1371/journal.pone.0146421. La, L., Leong, Y., Watts, HP., Au, P., Hayward, K., Zhang, L., (2016), A novel approach for the preparation of nanosized Gd2O3 structure: The influence of surface force on the morphology of ball milled particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 506(2016), 13-19, DOI: 10.1016/j.colsurfa.2016.06.005. Jia, Z., Miao, J., Lu, H., Habibi, D., Zhang, W., Zhang, L., (2016), Photocatalytic degradation and absorption kinetics of cibacron brilliant yellow 3G-P by nanosized ZnO catalyst under simulated solar light. Journal of the Taiwan Institute of Chemical Engineers, 60(2016), 267-274, Amsterdam, Netherlands, DOI: 10.1016/j.jtice.2015.10.012.